You recently updated to lớn Windows 10 và tried to connect your hard disk to lớn the system. But an error message appears, saying ‘you need to lớn format the disk in drive before you can use it.’ (See Image 1) The drive has some important files stored on it. When you check into the device manager và try to xuất hiện the device, you face the same error. But when you cancel it, the box shows this error ‘: (Drive) is not accessible. The volume does not contain a recognized file system. Please make sure that all required tệp tin system drivers are loaded & that the volume is not corrupted.’ (See Image 2)
Whether the error occurs in an internal drive or an external storage drive, you may thua trận access khổng lồ your data stored on the drive. Therefore, it’s important to keep a backup of your critical data at all times. In case of data loss, try a professional data recovery tool lớn recover your important files. And, in order to o fix this error ‘Volume does not contain a recognized tệp tin system’, follow the given methods .
Bạn đang xem: Error and system messages
Causes for ‘Volume does not contain a recognized tệp tin system’ Error
This error message may occur on an internal or external drive. The causes for this error are given as follows:
Corrupt or faulty drive Bad Sectors on the drive file system corruption Corrupt system files Drive turned RawMethods khổng lồ fix ‘Volume does not contain a recognized file system’
Method 1: Run SFC (System file Checker) Command
System file checker (SFC) is a Windows built-in troubleshooting utility. Using this utility, you may scan and fix corruption in system files. Try out this method lớn get rid of the error with the help of the following steps:
a. Type cmd in Windows tìm kiếm box to xuất hiện Command Prompt & click Run as administrator. (See Image 3)
b. Type SFC/Scannow command and hit Enter. (See Image 4)
c. This command scans all the corrupted system files và replaces them with a cached copy, which is located in a zip/compressed thư mục at Windows operating system thư mục (%Win
Dir%System32dllcache).
d. Wait until the process is completed và type Exit lớn close the Command Prompt.
e. Restart the system lớn see if the error ‘Value does not contain a recognized tệp tin system’ has been fixed.
Method 2: Scan Drive for Errors
If there is any corruption with your drive, you can check and scan the drive for fixing it. You need lớn connect your drive to lớn the system and perform the following steps:
a. open File Explorer & go lớn This PC.
b. Right-click on the drive with which you are encountering the error and click Properties. (See Image 5)
c. Go khổng lồ Tools, and click Check. (See Image 6)
d. After that, you will be prompted with a dialog box. Click Scan drive. (See Image 7)
e. This helps Windows to kiểm tra any errors or corruption with the drive. Once done, close the window và go back khổng lồ This PC to check if you can access your drive now.
Method 3: Run CHKDSK Command
CHKDSK Command utility helps in finding and fixing the drive corruption. It also helps in marking down bad sectors on the drive. You may use this utility to fix the error using the following steps:
a. xuất hiện Command prompt, run it as an administrator and type chkdsk f: f (where f: is the drive letter) and hit Enter. (See Image 8)
Lost data after using CHKDSK Command. What lớn do? Can I still get back my data?
CHKDSK command scans the drive, finds, và marks down the bad sectors on the drive, due lớn which, Windows will not store or read the data. In this situation, you will end up losing the data stored on the drive.
You can still recover it with a data recovery tool such as Stellar Data Recovery Professional. With the help of this easy-to-use, DIY software, you can extract any kind of data from Windows PCs and devices like HDDs, SSDs, external USB drives & optical media. It bacquangnamvtc.edu.vns data recovery even from NTFS, ex
FAT, and FAT (FAT16/FAT32) formatted drives. The data can also be retrieved from completely crashed & unbootable systems.
Watch this đoạn phim to Recover Lost Data:
Method 4: Fix the Drive with Unrecognized file System
If you get this error, xuất hiện Disk Management và see if the disk is shown as Unallocated. Try khổng lồ fix it with the following steps:
a. Right-click on the Unallocated drive, & click New Simple Volume. (See Image 9)
b. On the next prompt, click Next > Next & then specify the volume size. (See Image 10)
c. On the next wizard, click ‘Assign the following drive letter’, give a letter khổng lồ the drive, và click Next. (See Image 11)
d. On the next prompt, click ‘Format this volume with the following settings’.
e. Against tệp tin system, select NTFS, và click Next khổng lồ proceed. (See Image 12)
f. Click Finish. Restart the system và see if the issue has been fixed.
On the other hand, if you choose khổng lồ click “Do not format this volume” (See Image 13) to fix this error without any data loss, the drive will turn RAW. Don’t worry! Raw recovery is easy with stellar data recovery professional software.
Note: This method requires you khổng lồ format the drive, which means you will over up losing all the important data on it.
Wrapping Up
Usually, the error ‘Volume does not contain a recognized file system’ occurs when an internal or an external drive is occupied with corrupt system files, bad sectors, unallocated space, or a drive has turned RAW. You can get rid of the error with the help of the methods explained in this blog such as, running SFC command to check and fix system file corruption, scanning drives for errors, solving error with CHKDSK command, or formatting the drive.
These methods may prove khổng lồ be very helpful in getting rid of this error and make your drive accessible again. However, you may thua thảm the important data stored on the drive while attempting khổng lồ fix the error with methods like CHKDSK command or fixing the RAW drive. In such a condition, using a data recovery tool such as Stellar Data Recovery Professional is the way lớn go! This easy-to-use yet powerful software enables you to get back your data effectively from Windows PCs or removable disks/drives lượt thích HDD, SSD, USB, SD card, etc.
This error occurs when your graphics device driver has notified Windows that the device isn’t working properly. This may mean that the device has a hardware problem, or that the driver or driver software is failing. To fix this error, try the following:
Driver updates for Windows 10 & many devices (such as network adapters, monitors, printers, and video clip cards) are automatically downloaded & installed through Windows Update. Though it"s likely you already have the most recent driver, if you"re having trouble with a device, you can try fixing it by updating the driver.
Tap and hold or right-click the Start button, và then select Device Manager.
On the danh sách of devices, find the device that’s having driver problems (it will often have a yellow exclamation point next lớn it). Then tap and hold or right-click the device and select Properties.
Select Driver, and then select Update Driver.
Select Search automatically for updated driver software.
If a driver update is found, it will install automatically. Select Close when it finishes installing.
If Windows doesn’t find a new driver, you can try looking for one on the device manufacturer’s website & follow their instructions khổng lồ install it.
Roll back the device driver
If an update was recently installed, or you updated your device driver or driver software, you may be able khổng lồ fix the problem by rolling back the driver to the previous version.
Note: Windows 10 installs drivers automatically, so you don"t have to lớn choose which updates are needed. In rare cases, a specific driver might temporarily cause problems on your device. In this situation, you can prevent the problematic driver from reinstalling automatically the next time Windows updates by rolling back to a previous version.
Tap and hold or right-click the Start button & select Device Manager.
On the list of devices, find the device that’s having driver problems (it will often have a yellow exclamation point next to lớn it). Then tap và hold or right-click the device và select Properties.
Select Driver, and then select Roll Back Driver.
Uninstall & reinstall the device driver
In some cases, uninstalling and reinstalling the driver fixes the error:
Select the Start button. Type device manager in the tìm kiếm box, and select Device Manager from the các mục of results.
On the danh sách of devices, find the device that’s having driver problems (it will often have a yellow exclamation point next to it). Then tap và hold or right-click the device và select Uninstall > OK.
After the driver uninstalls, tap and hold or right-click the name of your PC (found at the vị trí cao nhất of the device list) & select Scan for hardware changes. This reinstalls the device driver.
Xem thêm: Cách làm má hồng tự nhiên - cho đôi má ửng hồng tự nhiên ngày đông
To see if this fixed the problem, tap and hold or right-click the name of the device again. On the General tab under Device status, you should see the message “This device is working properly.” If you don’t see this message, see the device documentation or contact the manufacturer.
SUBSCRIBE RSS FEEDS
Need more help?
Join the discussion
ASK THE COMMUNITY >
Get tư vấn
liên hệ US >
Was this information helpful?
Yes
No
Thank you! Any more feedback? (The more you tell us the more we can help.)Can you help us improve? (The more you tell us the more we can help.)
What affected your experience?
Resolved my issue
Clear instructions
Easy lớn follow
No jargon
Pictures helped
Other
Didn"t match my screen
Incorrect instructions
Too technical
Not enough information
Not enough pictures
Other
Any additional feedback? (Optional)
Submit feedback
Thank you for your feedback!
×
What's new
bacquangnamvtc.edu.vn Store
Education
Business
Developer & IT
Company
English (United States) California Consumer Privacy Act (CCPA) Opt-Out Icon Your California Privacy Choices California Consumer Privacy Act (CCPA) Opt-Out Icon Your California Privacy Choices © bacquangnamvtc.edu.vn 2023